HT&M Molding Department


Our molding area consists of a 6400 sq. ft. molding addition, which includes a 3600 sq. ft. class 100,000 cleanroom.

For pictures of our press room click on the (Cleanroom) link.
For contact information click on (Contacts) link.
 

 

2  Arburg 270 C 44 Ton Injection Mold PressesClick Here for a larger picture

    Machine Specifications:

  • Barrel Shot Size: .7 & 1.1 Ounces
  • Platen Size: 17.56 x 17.56
  • Tie Bar Spacing: 10.63 x 10.63
  • Maximum Opening: 21.65
  • Shut Height: 7.87
  • Hydraulic Core Pull

1 Arburg 370 S 55 Ton Injection Mold Press

    Machine Specifications:

  • Barrel Shot Size: .5 & 2.6 Ounces
  • Platen Size: 20 x 20
  • Tie Bar Spacing: 14.5 x 14.5
  • Maximum Opening: 23.62
  • Shut Height: 7.87
  • Hydraulic Core Pull

1  Arburg 83 Ton Injection Mold PressClick Here for a larger picture

    Machine Specifications:

  • Barrel Shot Size:  2.5 Ounces
  • Platen Size:  19 Square
  • Tie Bar Spacing:  12.5 Square
  • Maximum Opening:  14.75
  • Shut Height:  8.8
  • Hydraulic Core Pull

1  Arburg 420 C 110 Ton Injection Mold Press

    Machine Specifications:

  • Barrel Shot Size: 3.0 Ounces
  • Platen Size: 22 x 22
  • Tie Bar Spacing: 16 x 16
  • Maximum Opening: 29
  • Shut Height: 10
  • Hydraulic Core Pull

1  Arburg 470 C 165 Ton Injection Mold PressClick Here for a larger picture

    Machine Specifications:

  • Barrel Shot Size: 3.64 Ounces
  • Platen Size: 25.5 x 25.5
  • Tie Bar Spacing: 18.5 x 18.5
  • Maximum Opening: 29.53
  • Shut Height: 9.84
  • Hydraulic Core Pull

1  Arburg 520 A 176 Ton Electric Injection Mold PressClick Here for a larger picture

    Machine Specifications:

  • Barrel Shot Size:  6.49 & 8.2 Ounces (We have two barrels)
  • Platen Size: 28.66 X 28.66
  • Tie Bar Spacing:  20.47 X 20.47
  • Maximum Opening:  27.56
  • Shut Height:  9.84
  • Hydraulic Core Pull

2  Arburg 570 C 220 Ton Injection Mold PressesClick Here for a larger picture

    Machine Specifications:

  • Barrel Shot Size:  10.3 & 12.7 Ounces
  • Platen Size:  31.3 X 31.3
  • Tie Bar Spacing:  22.44 X 22.44
  • Maximum Opening:  37.4
  • Shut Height:  11.81
  • Hydraulic Core Pull
1  Cincinnati VT 300 Ton Injection Mold PressClick Here for a larger picture

    Machine Specifications:

  • Barrel Shot Size:  21 Ounces
  • Platen Size:  36.8 X 36.2
  • Tie Bar Spacing:  25 X 24.5
  • Maximum Opening:  48
  • Shut Height:  7.9
  • Hydraulic Core Pull

Support Equipment

1  Frigel EcoDry Fluid Cooler System

1  Central Dri-Air Material Handling & Drying System

4  Conair Thermolator Microtrack 2 Temperature Controllers

1  Conair 3 Ton Chiller

1  Temptek 7.5 Ton Chiller

2  Conair CD30 Dryers

2  Vacuum System Automatic Material Loaders

1  Ohaus Portable Digital Scale

1  Setra Supercount Portable Digital Scale

 

Note:  Sizes are given in inches.

  

Back to Top

Home | About Us | Design Dept | Machining Dept | Grinding Dept | EDM Dept | Molding Dept

Inspection Dept | Where is Meadville | Airport Directions | Picture Page | Contacts | Lockwood Racing