Holbrook Tool & Molding Inc.
Holbrook Molding
Our molding area consists of a 6,400 sq. ft. molding addition, which includes a 3,600 sq. ft. class 100,000 cleanroom. We have a certified clean room with 9 presses for medical grade molding.
-
(2) Arburg 270 C 44 Ton Injection Mold Presses with Robot
- Barrel Shot Size: .7, .9 & 1.1 Ounces
- Platen Size: 17.56″ x 17.56″
- Tie Bar Spacing: 10.63″ x 10.63″
- Maximum Opening: 21.65″
- Shut Height: 7.87″
- Hydraulic Core Pull
-
(1) Arburg 420C 110 Ton Injection Mold Press with Robot
- Barrel Shot Size: 3.0 Ounces
- Platen Size: 22″ x 22″
- Tie Bar Spacing: 16″ x 16″
- Maximum Opening: 29″
- Shut Height: 10″
- Hydraulic Core Pull
-
(1) Arburg 370 S 55 Ton Injection Mold Press
- Barrel Shot Size: .5, .7, .9 & 1.1 Ounces
- Platen Size: 20″ x 20″
- Tie Bar Spacing: 14.5″ x 14.5″
- Maximum Opening: 23.622″
- Shut Height: 7.87
- Hydraulic Core Pull
-
(1) Arburg 470C 165 Ton Injection Mold Press with Robot
- Barrel Shot Size: 3.64 Ounces
- Platen Size: 25.5″ x 25.5″
- Tie Bar Spacing: 18.5″ x 18.5″
- Maximum Opening: 29.53″
- Shut Height: 9.84″
- Hydraulic Core Pull
-
(1) Arburg 520A 176 Ton Electric Injection Mold Press with Robot
- Barrel Shot Size: 6.49 & 8.2 Ounces (we have two barrels)
- Platen Size: 28.66″ x 28.66″
- Tie Bar Spacing: 20.47″ x 20.47″
- Maximum Opening: 27.56″
- Shut Height: 9.84″
- Hydraulic Core Pull
-
(2) Arburg 570 C 220 Ton Injection Mold Presses (1 Press with Robot)
- Barrel Shot Size: 10.3 & 12.7 Ounces
- Platen Size: 31.3″ x 31.3″
- Tie Bar Spacing: 22.44″ x 22.44″
- Maximum Opening: 37.4″
- Shut Height: 11.81″
- Hydraulic Core Pull
-
(1) Cincinnati VT 300 Ton Injection Mold Press
- Barrel Shot Size: 21 Ounces
- Platen Size: 36.8″ x 36.2″
- Tie Bar Spacing: 25″ X 24.5″
- Maximum Opening: 48″
- Shut Height: 7.9″
- Hydraulic Core Pull
-
(1) Frigel EcoDry Fluid Cooler System
-
(1) Central Dri-Air Material Handling & Drying System
-
(4) Conair Thermolator Microtrack 2 Temperature Controllers
-
(1) Conair 3 Ton Chiller
-
(1) Temptek 7.5 Ton Chiller
-
(2) Conair CD30 Dryers
-
(2) Vacuum System Automatic Material Loaders
-
(1) Ohaus Portable Digital Scale
-
(1) Setra Supercount Portable Digital Scale
-
(1) Regloplas High Temperature Water heater for Mold Temperatures up to 390°
-
(1) Rapid Runner and Scrap Granulator
-
(4) 12 Zone Gammaflux Hot runner Controllers
-
(5) Frigel Mold Heater/Chiller Combos
-
(4) Avery Weigh-Tronix Piece Count portable Scales
-
(2) Maguire Color Adders
-
(1) Triner Scale: 10,000 lb. Capacity Floor Scale
-
Note: Sizes are given in inches.
Contact Holbrook Tool & Molding
Call (814) 336-4113 to talk to an engineer about your next project.
